Morris Minor Owners Club

Posted: **Sat Dec 07, 2019 2:58 pm**

Hi,
I noticed that there was a tag with a hole in it on the bottom of my heater, which may be for it to be fixed to something but which was not in use on mine.
When I refitted my heater today I noticed that it moved backwards and forwards and could do with bracing, so having a bit of threaded bar to hand I came up with the below.
It is now nice and stable.
Best wishes,
Mike.

: Threaded bracing bar.JPG (789.45 KiB) Viewed 3522 times

Posted: **Sat Dec 07, 2019 4:19 pm**

If you re-fitted your parcel shelf you would not only gain a parcel shalf but heater brace....

John ;-)

Posted: **Sat Dec 07, 2019 5:04 pm**

John is right - you can see how it fits in the third picture, 10 posts down in this thread: https://www.morrisminorspares.com/misce ... nt-p831127

Posted: **Sat Dec 07, 2019 5:22 pm**

John is right - you can see how it fits in the third picture, 10 posts down in this thread:

Hi,
For some reason your attachment takes me straight to the ESM site, rather than another post??

I will be refitting the shelf that was in it eventually, it would get in the way whilst I'm still working in there. It's not the original anyway, it was created by the previous owner, though is pretty much the same as the original, I think........
However I prefer to not to tie it into that bar, I like it independently mounted. Although I will look to see how it fits out of curiosity.
Best wishes,
Mike.

Posted: **Sat Dec 07, 2019 5:55 pm**

Whoops! Mea culpa!

Here you go: viewtopic.php?f=6&t=65935&p=604424&hili ... lf#p604424

Posted: **Sat Dec 07, 2019 6:24 pm**

Thanks.
Best wishes,
Mike.

Morris Minor Owners Club

Bracing bar for heater

Bracing bar for heater

Re: Bracing bar for heater

Re: Bracing bar for heater

Re: Bracing bar for heater

Re: Bracing bar for heater

Re: Bracing bar for heater