Page 1 of 1
Disk Brakes identification
Posted: Mon May 23, 2005 9:56 pm
by johncannon
I have obtained some disk brakes off a scrap Minor which I assume are Marina based? Is there an obvious way of telling?
The pitch of the studs is not from a minor -possibly marina? I am sure have read these can be converted to suit normal minor wheels?
Any help please?
RE: Disk Brakes identification
Posted: Tue May 24, 2005 10:48 am
by Cam
Normal Marina hubs can be converted to a Minor PCD of 4". What is the distance between two opposing studs on your hubs?
The best way of itentification is to take a 'photo and post it on here. If you can't post it then e-mail it to one of us and we'll post it for you.
Posted: Tue May 24, 2005 7:55 pm
by johncannon
I am stuggerling to copy a picture into the message. How do i do this?[/img][/url]
Posted: Wed May 25, 2005 11:05 am
by Cam
If you have webspace then upload the picture to it and either post the link to it on here, or post the link and enclose it in the [img]and[/img] sections and it will display.
If you don't have webspace then e-mail the picture to one of us (me if you like) and I'll upload it for you.