Page 1 of 1
Morris Minor spark plug holder
Posted: Wed Jul 03, 2019 11:49 am
by Declan_Burns
Here's my latest 3D printer project. A Morris Minor spark plug holder-well my version
I had been making them for the MG scene.
Regards
Declan
Re: Morris Minor spark plug holder
Posted: Wed Jul 03, 2019 7:14 pm
by philthehill
Well done Declan
Reminds me of the time when most cars carried a spare set of spark plugs under the bonnet.
Will the plug carrier allow the fitment of extended nose plugs i.e. N9Y ?
On my modern you have to part dismantle the engine to get at the spark plugs - but there again I have never had need to remove the spark plugs - they just seem to go on and on without fault unlike the Minor which had the plugs replaced at 12,000 mile service intervals or every year.
With modern plugs the electrodes do not seem to degrade as quickly as they used to in the 50s, 60s & 70s.
Phil
Re: Morris Minor spark plug holder
Posted: Thu Jul 04, 2019 9:11 am
by Declan_Burns
Phil,
Yes it takes long and short reach plugs.
Regards
Declan