Removing boot lock barrel - Step by Step Guide - Part 4
Posted: Mon May 06, 2019 1:53 am
Hole drilling completed and ready for roll-pin (retaining pin) insertion
Insert the roll-pin (or other type of retainer)
Now cut the retaining pin to size
After cutting, the finished assembly
Replace in the boot lid and stand back to admire your work.
- 15-Drilled hole ready for roll-pin.jpg (332.83 KiB) Viewed 625 times
- 16-Roll-pin inserted.jpg (279.43 KiB) Viewed 625 times
- 17-Cutting roll-pin to size.jpg (277.3 KiB) Viewed 625 times
- 18-Operation completed.jpg (297.77 KiB) Viewed 625 times