Page 1 of 1

Repro indicator switch

Posted: Sun Nov 25, 2018 10:57 pm
by Fingolfin
Hi all,
Last year I fitted a reproduction turn signal / indicator switch in Mog, as a "Christmas present" (inasmuch as the car can appreciate the gesture...). It's always given me problems, mostly in sloppiness, which became worse and worse until the left turn function failed entirely. So, being a tinkerer, I tore the whole thing down, filed and countersunk and modified to tighten everything up, and managed to fix all the problems; movement in both directions is smooth and solid, and the exterior lights work.

However...I have fouled something up, because the indicator lamp on the end of the stalk illuminates only on the left engagement, not on the right. The exterior lights still light up and the flasher unit clicks cheerfully. If you catch the timing correctly, the stalk lamp will occasionally light up on cancelling the right-hand turn, when the stalk returns to center.

Any ideas what could cause that symptom? My money's on an earth not making contact - but I'm not quite sure how the stalk lamp earths.

Re: Repro indicator switch

Posted: Mon Nov 26, 2018 2:40 am
by shoebone
Weird that it would work one way but not the other, I believe the stalk light is fed by the light green wire from the flasher unit and is earthed through the black wire on your repro unit. I would be checking/cleaning connections, especially the earth. I fitted a new unit not so long ago..... Quality is dubious :roll:

Re: Repro indicator switch

Posted: Mon Nov 26, 2018 7:32 pm
by Fingolfin
Driving to work today, the light did illuminate in the previously-dark direction - but sometimes the light fluttered, was weak. Since it's begun to work, I think I may have introduced a bit of debris or something into the mechanism, which has since (mostly) cleared. 8)

Fingers crossed it keeps on getting better!