Page 1 of 1

Fuel gauge causing fuse to blow

Posted: Sun Sep 09, 2018 2:00 pm
by Pucketsport
I have just finished rebuilding a 57 Moggie and have fitted a new wiring harness. When I turn on the ignition the fuse that supplies power to the green wires blows. When I disconnect the gauge green wire and the green/brown wire the fuse does not blow. Does this mean my gauge is broken or the fuel sender unit is broken and causing a short. Also there doesnt seem to be an earth connection on the tank sender unit, surely this needs to be earthed? Is there a quick and dirty way to check if the gauge or sender are faulty using a multimeter ?

Re: Fuel gauge causing fuse to blow

Posted: Sun Sep 09, 2018 6:29 pm
by geoberni
Well first off, lets put a comment here that to save a lot of confusion, all replies should be in one place, over on the OTHER post you've made

viewtopic.php?f=11&t=69123

Clearly not an accidental double post as the wording is different :o

Re: Fuel gauge causing fuse to blow

Posted: Sun Sep 09, 2018 8:09 pm
by simmitc
Good point, I'm locking this thread.