Page 1 of 1
Gearlever Rubber Gaiter
Posted: Wed Jul 11, 2018 4:06 pm
by owenmorris
Hi can anybody tell me where I can get a decent Gearlever Rubber Gaiter from as I have fitted two in the last 12 months and they have both split after a short time.
Thanks, Bernard.
Re: Gearlever Rubber Gaiter
Posted: Wed Jul 11, 2018 5:12 pm
by philthehill
Does the gear lever gaiter have to be rubber?
Even the original BMC ones split and had to be changed on a regular basis.
Unless you want absolute originality I would consider fitting a different type/material of gaiter.
For example:-
https://www.ebay.co.uk/itm/Universal-Le ... SwyXNZ6J62
The original type could be left in place to keep the dirt out and the alternative worked so as to fit under the gaiter holding plate.
Re: Gearlever Rubber Gaiter
Posted: Wed Jul 11, 2018 5:13 pm
by viewsonic1
Got mine from Bull Motif around five years ago. Had no problems.
Re: Gearlever Rubber Gaiter
Posted: Wed Jul 11, 2018 9:04 pm
by SteveClem
Leather looks good.
Re: Gearlever Rubber Gaiter
Posted: Fri Jul 13, 2018 10:05 pm
by GavinL
You could try a vinyl gaiter from an MG Midget - the Midget had a rubber cover under this, but the rubber cover is bigger than the Minor one. Below I've sat a spare Midget vinyl boot on a Minor gearbox cover.
Re: Gearlever Rubber Gaiter
Posted: Sat Jul 14, 2018 8:28 am
by Nickol
...or indeed use a rubber lubricant which aeromodellers use for free flight rubber motors. Applied to the inside before fitting , it keeps the material supple.