Morris Minor Owners Club

I'm fitting a 1275 Midget clutch to a 1275 Midget flywheel, but as I bought the engine sans clutch I don't have the original set screws. I know these are 5/16 UNF, and I think they should be 3/4" length. I'm struggling, though, to find a supplier of hex head set screws in anything greater than 8.8 grade (SAE-5). Will this be adequate - 1275 engine but only intended for sedate road use, no track days or hill climbs!

Mark

8.8 Grade high tensile screws will be more than adequate.

If in any doubt order a new set (qty 6) of clutch cover screws from MOSS Pt No: SH605061 @ £0.19 each plus the usual.

Cheers Phil, much appreciated.