Page 1 of 1
Rubber washer wing to valance
Posted: Mon Apr 09, 2018 4:57 pm
by Propshaft
Hi the rubber spacer washer between the front bumper valance and the underside of the wing , is there a nut and bolt to fix the two together or is the rubber spacer just fixed to the underside of the wing acting as a buffer ,also roughly were is it positioned . Thanking you in anticipation
Re: Rubber washer wing to valance
Posted: Mon Apr 09, 2018 5:10 pm
by taupe
Hi
These were fixed with a split rivet brp1108 (Bifrucated Rivet) and rivet washer adj7112 into an approx 1/8" hole in the bottom flange of the wing.
From memory the later hole is approx midway along the flange but someone else will know for sure....the earlier hole is right at the front The second buffer was added at chassis No.934674 approx
Taupe
Re: Rubber washer wing to valance
Posted: Tue Apr 10, 2018 7:24 am
by ManyMinors
The holes are still in the wings - at least if you purchase UK made Heritage wings. The rubber buffers are still available too.
Re: Rubber washer wing to valance
Posted: Tue Apr 10, 2018 7:54 am
by Propshaft
Hi thanks for your replies I have the rubber buffers and there is indeed one hole towards the back of the front wing about 4mm diameter