Spark Plugs
Posted: Tue Apr 19, 2005 9:22 am
Any suggestions on which plugs to run on my 1380 Tuned morris? Standard champions? or should i be using different ones?
Thanks
Martyn
Thanks
Martyn
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Spark Plugs
Page 1 of 1
Posted: Tue Apr 19, 2005 10:30 am
Depends on how hot the combustion chamber is getting. If it's anything like mine (which I suspect it probably will be) then for 10:1 compression an '8' heat setting is pretty good. I use NGK BP8ES plugs and have found them to be superb.
Posted: Tue Apr 19, 2005 10:32 pm
Cheers Cam,
Just ordered the plugs, what do you set your gap at? Would it be any benefit to set my gap slightly larger, when i bought all the Aldon stuff the guy said i could make my plug gaps wider.
Martyn
Just ordered the plugs, what do you set your gap at? Would it be any benefit to set my gap slightly larger, when i bought all the Aldon stuff the guy said i could make my plug gaps wider.
Martyn
Posted: Wed Apr 20, 2005 10:16 am
Well, I just set them to standard setting 0.6mm (or 25 thou), but you might be able to get away with up to 1mm. Actually, so might I, thinking about it! 