Morris Minor Owners Club

Hi friends

I want to know about 1950 MM car brake system ,
1. Master cylinder
2.Front wheel Cylinders

What is the diffarents of master cylinder and front wheel cylinders when the compare with 1000 (before 1962) car ?

Where the place can buy front wheel cylinders (1950 car )?

And can i buy master pump '' inside piston '' for it (1950 car master pump )

Regards
Sandun .

Master cylinder. You can but new cylinders complete for the cost of a tyre. Different internal size but OK to use.

Front wheel cylinders. Expensive for the MM. Not easy to find. You can change them to 1955 age brakes by changing the backplate/springs/cylinders to the 7 inch 948 ones for less money. MM are aluminium, 948 are steel (and cheap)

Given that Sandun's car is a 1957 I think he may be using a MM as shorthand for Morris Minor rather than Series MM and 1950 may be read as 1950's. That said all the information given to him is germane!

Friend of mine ask advice to make brake of his 1950 year MM car - Unluckily i dont know diffarent bitween 1957 (my car ) and his MM (Cylinder model and other ) I just look ESM to buy front brake cylinders , Dont know which cylinders for it .

However , I want to know , what is the diffarent of them , it will improve my knowledge .

MM 1950 like this in aluminium Later models in steel

Oh... Many Thanks - rear cylinders are same with the later one or can set ?

from Where can it (Aluminiam one ) buy ? I have not seen befor - many thanks for pic