SPEEDO DIAL BULB.

[cuk]

Hi,
1970 Traveller 1000.

I have the main speedo dial bulb out. Does anyone know the easiest way to change it?
Thanks regards Paul.

[firedrake1942]

slacken the two retaining screws through the holes in the glove boxes , turn and withdraw the speedo assembly. all the bulbs will then be accessible. care should be taken as the others will pop out of their holes if you take the speedo out too far, before doing all this , make sure it is not just switched off with the small under dash mounted switch.

https://www.morrisminorowners.co.uk/vie ... =20&t=5274

although expensive, LED bulbs are much brighter and longer lasting,

[cuk]

Thanks Firedrake,
All sorted. It was only the switch, but not having an owners handbook, did'nt know it was there!
Cheers Paul.