Morris Minor Owners Club

Hello will this eye bolt be ok with a new pin and polybushes with lots of grease? I'm just thinking it could be hassle to remove. Thanks Steve

I'd say it was well knackered but if you can't replace at least clean out the bore and turn 180 degrees to displace the wear. New one recommended!

Thanks il order one. Just seen some of the poor quality of the new ones. It popped out alright anyway and looks alot worse now it's out. Cheers

That eye bolt is only fit for the scrap bin.
Only if the wear in the eye bolt eye is minimal should you turn the eye bolt through 180 degrees to get a bit more life out of it.
Any serious wear in the eye bolt (as with the eye bolt featured) will rapidly degrade the eye bolt bushes whether they are rubber or poly bushes.
Coat the eye bolt shaft with 'Copperease' before fitting to alleviate any possibility of seizure in the future.
If fitting poly bushes lightly smear with red or white grease before fitting.

New one ordered. Should be here soon. I will do thanks Phil. I knew really it was scrap, was just wishful thinking. Luckily parts are cheap and available.

Cheers Steve