Page 1 of 1
803 gearbox mount
Posted: Fri Mar 10, 2017 6:15 pm
by ampwhu
ok, ive tried but not had much luck. whats the easy way to get these on.
Re: 803 gearbox mount
Posted: Fri Mar 10, 2017 10:33 pm
by philthehill
If it is the rubber mounting you are having trouble fitting - smear with rubber grease and slide over the tail shaft housing and then fit the loop over bracket and bottom bracket around the rubber mounting.
Re: 803 gearbox mount
Posted: Sat Mar 11, 2017 3:41 pm
by ampwhu
done. washing up liquid.
Re: 803 gearbox mount
Posted: Sun Mar 12, 2017 8:09 am
by philthehill
The trouble with washing up liquid is that it contains salt which is corrosive and that why it is better to use rubber grease or something similar.