Page 1 of 1

Bonnet Anti rattle spring, interior light location

Posted: Mon Feb 20, 2017 8:02 pm
by greendefender123
Hello Could you please remind me of the location of the bonnet lever rattle spring location. I don't remember removing it. Can't find much about it. And also the location of the interior light for a traveller as it was already removed and I need to refit the wood to something. Again I cant much on this.

Thanks alot Steven

Re: Bonnet Anti rattle spring, interior light location

Posted: Mon Feb 20, 2017 8:33 pm
by Mark Wilson
The interior light is central, just to the rear of the roof join. Mine (1971) is mounted on a metal bracket fastened to the roof joining bolts, but I've seen a wooden mount on pictures of earlier ones.

Not sure if I can help on the anti rattle spring. Mine was attached to a small triangular plate which hooked over the long bonnet release rod, but can't remember where the front end attached. As I've lost the small plate for mine I hope someone else comes up with a picture of one!

Mark

Re: Bonnet Anti rattle spring, interior light location

Posted: Mon Feb 20, 2017 8:44 pm
by greendefender123
Oh does it? Mines a 1970 i can only find abit of wood that looks like it might do it. Tho im sure I can make something up. Gotta buy a rear head lining aswell.

With the bonnet spring iv got the small plate and spring but can't remember disconnecting them and can't see how it goes. Tho im sure it's not to important.

Thanks Steve

Re: Bonnet Anti rattle spring, interior light location

Posted: Mon Feb 20, 2017 9:57 pm
by panky
This might help.

Image

Re: Bonnet Anti rattle spring, interior light location

Posted: Mon Feb 20, 2017 10:02 pm
by greendefender123
Thanks panky almost feel abit stupid now. Tho id feel more stupid having it rattle.

Thank you aswell Mark.

Re: Bonnet Anti rattle spring, interior light location

Posted: Mon Feb 20, 2017 10:37 pm
by Mark Wilson
And thanks from me to Panky as well, that's helpful. I like the coil bracket/elephants trunk retainer arrangement - is that a one-off?

Re: Bonnet Anti rattle spring, interior light location

Posted: Mon Feb 20, 2017 11:10 pm
by panky
I re-used the bracket that held the coil to the dynamo when I went to alternator. There's not much room on the inner wing to locate the coil and the bracket fitted round the elephants trunk perfectly with very little modification :)

Re: Bonnet Anti rattle spring, interior light location

Posted: Tue Feb 21, 2017 3:44 am
by millerman
panky wrote:This might help.

Image
I believe the anti-rattle spring hooks in the hole to the right on the two bolt heads :wink:

Re: Bonnet Anti rattle spring, interior light location

Posted: Tue Feb 21, 2017 10:54 pm
by Budgie
I concur with the hole location next to the two bolts is where the spring should hook into.