Page 1 of 1
Alta engine differences
Posted: Fri Aug 12, 2016 9:15 pm
by TvdWerf
I can get a garage clear out, with also a complete Alta engine and other Morris parts...
How interesting is it to change my original engine with this one?
Re: Alta engine differences
Posted: Fri Aug 12, 2016 10:27 pm
by tortron
THat depends on what you are interested in
The alta OHV head produces a lot more power and is more efficient by design than the sidevalve
it will also stick out a bit if you like showing off to other sidevalve owners due to the rarity.
if you don't like it, send it my way

Re: Alta engine differences
Posted: Sat Aug 13, 2016 8:12 am
by TvdWerf
Too Heavy for an envelope ;)
But what should be an acceptable price for an engine like this?
I promised the man to clean his store, a lot other (later) parts are in there.
Re: Alta engine differences
Posted: Sat Aug 13, 2016 10:15 am
by RobThomas
I paid £1300 for mine as a running engine with gearbox and twin carbs. Rebuilt and in fantastic condition, apart from one valve needing to be ground in and the top water elbow being a bit corroded. If you have
ALL the parts there it will make a great engine.
If the top water elbow is corroded then Will is after getting me to re-cast some new ones. I'll only be doing this once so let me know if you need one.

Re: Alta engine differences
Posted: Thu Aug 25, 2016 10:39 am
by mike.perry
If the head is not attached to the engine you can see the condition. If it is attached to the engine it may be severely corroded and will cost a fortune to repair
Re: Alta engine differences
Posted: Thu Aug 25, 2016 2:28 pm
by RobThomas
I'll give you 10 Euros for it!

Re: Alta engine differences
Posted: Sun Aug 28, 2016 9:07 am
by TvdWerf
I will see what is the condition.
What I understand, is the risk from a damaged engine.
But nobody can live without a little bit luck ;)
Re: Alta engine differences
Posted: Sun Aug 28, 2016 5:37 pm
by RobThomas
If the top water exit is corroded then let me know? Will wants me to cast him a new one and it is a long job so easier to make 2 at the same time. I don't plan to make any more.
This piece...
