Morris Minor Owners Club

I've recently replaced my headlights with new sealed beam units, which I bought new from a local Wilco store £12 each, bargain
How can I check their aligned properly?
Thanks
Richard

I do it by parking on flat surface about 4 'to 6' from a wall . Measure the height of the center of the lamp and mark the wall at the same height . Adjust the lamp till you hit the mark .

I'm utterly amazed Wilco sell sealed beam headlights!!!!!! I had several going FREE a few weeks ago - and no takers....

rreems,

Do you know whether Wilco Motosave are the same as Wilco Motor Spares. I only know of the one in Wisbech, but I see the northern ones are all called Motosave.

RAB

Edited to add: I see there is one closer and more handy for me - at Kettering

Wilco for us a department store -successor to Woolworths really, only much better.

Here is the web link, https://www.wilcodirect.co.uk
I have bought a few things for my minor from them, most notably my replacement Securon seat belts, I think my best purchase so far was £30 for my replacement one piece exhaust from my local motor factors

That WAS a bargain! Should have bought 6 !!

Hi big Jim, excuse my ignorance but, when you say measure the height of the centre of the lamp, is that from the ground to the centre of the lamp?

Thanks Richard

Hi Richard
Measure vertically from the ground to lamp center and then mark the wall at the same height . It is a quick job to do , easier if it is a dull day or at dusk .
Jim

Thanks big Jim!