Morris Minor Owners Club

Islip you have a pm[frame][/frame]

Nice pulley.
Are you going to install the damper that is secured to the pulley by the 4 threaded holes?
http://www.minispares.com/product/Class ... ssic/crank damper.aspx|Back to search
The Mini Spares damper Allen headed set screw is a good move unless you want to retain the starter dog.
http://www.minispares.com/product/Class ... ssic/crank damper.aspx|Back to search
You will find that the dynamos/alternator slotted adjuster will fit better the other way around i.e. the slot is at the dynamo/alternator end.
Nice to see that you have installed the 3rd bolt to the timing cover where it deflects around the tensioner.
Phil[frame][/frame]

Hi Phil
The previous pic is about a year old
Thought i was the only one with nodiz, now i know richard has it will be keen to know what he thinks of it. I really do rate it[frame][/frame][frame][/frame][frame][/frame]

Ah, no distributor. Now I understand. I thought I'd landed on the planet Zog.

Nodiz = no-dis(tributor)[frame][/frame]

Beatroot52
Thank you for the reply.

http://www.nodiz.co.uk/

I will be interested to hear what Richard has to say.

You may be interested:-

http://www.ebay.co.uk/itm/Classic-mini- ... 3ac510e9f1

Phil

Is that a RetroSport blanking plug I spy?

Yep, from dsn. Have been up and running for a year using the standard map but pulled engine out last week for sill work