Page 1 of 1
hs2 carb with breather
Posted: Sat Feb 13, 2016 2:50 pm
by dalebrignall
my car has the standard hs2 carb fitter the breather goes to the front of the air filter and the fumes then go back in the engine and eventually make the air filter dirty . would i notice a difference with the carb with the breather in general running or do i just change the air filter every 6 months to keep it clean your opinions please .
Re: hs2 carb with breather
Posted: Sat Feb 13, 2016 3:19 pm
by bmcecosse
It would be much better to have the breather carb. Saving on filters -and better fume extraction from the crankcase - which helps to stop any leaks and can reduce oil consumption.
Re: hs2 carb with breather
Posted: Sat Feb 13, 2016 6:06 pm
by Declan_Burns
Dale,
You can also use a carb spacer-something like this:
https://www.minispares.com/product/Clas ... .aspx|Back to shop
I don't know the size of the hole.
Regards
Declan
Re: hs2 carb with breather
Posted: Sat Feb 13, 2016 7:40 pm
by bmcecosse
I think that's just for vacuum advance connection. The 'best' of course is to fit a PCV valve directly on the manifold (drilling and tapping required.....) and connect that to a breather to draw all nasty fumes directly into the cylinders.
Re: hs2 carb with breather
Posted: Sat Feb 13, 2016 10:45 pm
by mike.perry
[frame]
[/frame]
Breather pipe connected to PSV
Re: hs2 carb with breather
Posted: Sun Feb 14, 2016 10:35 am
by Declan_Burns