Page 1 of 1

Wiper blades

Posted: Mon Jan 18, 2016 12:45 pm
by les
I'm looking for black plastic wiper blades as opposed to the chrome ones, also black infill for the windscreen rubber, again as opposed to the chrome plastic variety. Can't anyone suggest a supplier please ?

Re: Wiper blades

Posted: Mon Jan 18, 2016 6:27 pm
by aupickup
ebay :D

Re: Wiper blades

Posted: Mon Jan 18, 2016 6:31 pm
by les
I was expecting you to have some Dennis. :D

Re: Wiper blades

Posted: Tue Jan 19, 2016 7:24 pm
by SteveClem
Black spray paint?

Re: Wiper blades

Posted: Tue Jan 19, 2016 7:54 pm
by les
SteveClem wrote:Black spray paint?
Actually Steve, that's not a bad idea, as there is still plent of life left in the ones fitted.

Re: Wiper blades

Posted: Wed Jan 20, 2016 7:48 am
by SteveClem
I sprayed a few chrome bits on my old Landrover when I 'de-blinged' it. Worked pretty well.

Re: Wiper blades

Posted: Tue Feb 09, 2016 11:04 pm
by RussLCV
Les

I have used Landrover arms black hooked cut down and welded to the right length and they now accept aero-flat blades.... much better and the 10/11" Mini blades fit nicely too

Re: Wiper blades

Posted: Wed Feb 10, 2016 9:17 am
by ManyMinors
I don't really care what my blades look like but I DO want them to wipe the screen clear! After a disappointment with expensive "Tex" stainless steel blades which fell to pieces within months, I bought a pair of black "Lucas" blades which do a great job and cost less than £3.00 each from a local motor factors :) Part number is LWCB11 for the 11inch blade.

Re: Wiper blades

Posted: Wed Feb 10, 2016 11:11 am
by les
Thanks for posting that info, I'll see if my local factor have them.

Re: Wiper blades

Posted: Wed Feb 10, 2016 5:17 pm
by les
Located these blades online but can't get a good view of how they fit to the arms. Do they slide onto the arms which are about 5 mm wide (what I consider the standard Minor fitment) or are they the type that fit an arm that ends in a U shape?

Re: Wiper blades

Posted: Wed Feb 10, 2016 5:41 pm
by ManyMinors
Les, mine fitted straight on to the original Minor 1000 arms as a direct replacement for the previous blades. Just seconds to fit :)
They don't look "original" but work well which is what I wanted. The blade carrier is metal but there is a plastic clip which attaches to the arm. I'll take a photo if I can.

Re: Wiper blades

Posted: Wed Feb 10, 2016 6:20 pm
by les
Ok if that's no trouble, then I'll order some, thanks. :D