help
Posted: Wed Feb 23, 2005 8:28 pm
I have just aquired a large box full of spares inside to my surprise was an engine....... the engine number is oma-u-h-16623 can any one help me to find the size of this engine and maybe its age.
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
help
Page 1 of 1
Posted: Wed Feb 23, 2005 10:27 pm
you may find a plate (looking from the front on the left side of the block) just below where the dynmo would sit. this plate is fixed just above the sump gasket line. if its there it will say the cc of the block. its below / in the area of the number plate you have mentioned. if the plate is not there, the cc may be cast in the block in the same area.
Posted: Thu Feb 24, 2005 9:08 am
Well both my 1098 & 1275 id plates are on the front right hand side of the engine below the manifold.
Posted: Thu Feb 24, 2005 10:53 am
Same as.
Posted: Thu Feb 24, 2005 9:38 pm
By my reckoning you've got a 1098cc high compression engine from a late Minor with central gearchange. Hope this helps.
Posted: Fri Feb 25, 2005 6:32 pm
sorry everyone, sure! right side
from help!
Posted: Fri Feb 25, 2005 6:52 pm
thanks for all your help. 
at least ive got a better idea. thanks again
at least ive got a better idea. thanks again