Morris traveller

[Complete Pete]

Hi All,
I am building a traveller for my wife I've stripped the shell and replace all the panels that have been repaired with little patches. ( and believe me there was loads) the boot floor has been repaired around the fuel tank area and could do with been replaced.
The problem is I cannot find a complete boot floor panel...... Does anyone know if one is available and where I can get one???

Thanks
Pete[frame][/frame]

[DAVIDMCCULLOUGH]

Hi and welcome to the messageboard Pete

This is the only panel available for the back anything further towards the tank than that would have to be cut from a scrapper or fabricated to suit.

http://morrisminorspares.co.uk/shop/pro ... 5d0543c5a8

You should start a restoration thread! There are some very inspiring ones there already that should give you encouragement.

[Complete Pete]

I had started one last year... But time and money put a stop to proceedings. I am just finishing a metro turbo Mini Cooper s lookalike for the Italian Job charity rally in October and promised the wife I would get back on with the traveller.

I have carried out most of the body resto already but after it had been media blasted I have decided the boot floor needs replacing.......along with the rear chassis around the spring hangers..... I'll keep an eye out on ebay for a scrapper...

Pete[frame][/frame]

[les]

Let's have some photos of the 'S' !!

[Complete Pete]

I'll dig some out.....