Morris Minor Owners Club

Hi all,ive just fitted a water temperature
Gauge and was wondering what normal
Temperature it should read in average
Driving.i won't be using till the morning for
Work
Regards
John[frame][/frame]

depends on what thermostat you have fitted

Is it electric ? Does it run from the 10 volt ballast supply??

Oh boy,no idea what thermostat.i just wired it to the ignition
As per instructions?
Regards
John

The stat will probably be 82 or 88 degrees Centigrade, so the gauge should give something similar. I presume that you have already gone to -ve earth, which is essential for most modern gauges (older ones didn't care). It is normal to power gauges like this from the instrument voltage stabiliser (the one that feeds the fuel gauge) otherwise you might see variable readings.

That gauge Looks similar to one of mine. It runs from 12v, so the voltage stabiliser (10V) would not work too well as a supply. It shows consistent readings but maybe not totally accurate readings.
Get used to where it normally reads and take note of any deviation from normal.

Where have you fitted the temperature sensor?