Page 1 of 1
door window draught exc.
Posted: Tue Aug 18, 2015 11:59 am
by lencot76
Hello some time ago,someone mentioned about the rubber strip exc .for the doors rather than the "material" one I have who does these and what are they like to fit
Re: door window draught exc.
Posted: Tue Aug 18, 2015 12:31 pm
by SteveS
Just got a full set for my 4 door from ESM
very easy to fit bought new clips 6 for each
Rubber I think fitted rubber on outside and felt on inside
You wouldn't believe the difference it makes
Re: door window draught exc.
Posted: Tue Aug 18, 2015 12:36 pm
by SteveS
Sorry Misread the door seals are rubber and just push on
Very easy to fit no clips required very sturdy
Again got from ESM
Re: door window draught exc.
Posted: Wed Aug 19, 2015 9:29 am
by lencot76
Hello thanks about the seal,is this the EXC105A one,my doors are wrapped at the moment after spraying ,are the holes there ,for the draught clips to go into
Re: door window draught exc.
Posted: Wed Aug 19, 2015 9:49 am
by Boomlander
The main door draught excluders simply push fit onto the door frame not the door itself.There are holes in the inside of the window channel to fit the Touch Glass type window seals Part No. EXC105A at the top of the door where it meets the glass, the holes at the bottom of the door are for rubber seals to prevent water seeping in.
Re: door window draught exc.
Posted: Wed Aug 19, 2015 10:02 am
by liammonty
The Birmingham Morris Minor Centre (aka David Manners) sell them too - I got mine from there and they made a big difference.
Re: door window draught exc.
Posted: Wed Aug 19, 2015 12:16 pm
by Boomlander
The touch glass rubber door/window seals certainly stop the drop glasses rattling whilst driving and are well worth fitting to the outside edge keeping the fabric seals on the inboard side.