Page 1 of 1

Exhaust pipe fitting

Posted: Sat Aug 01, 2015 5:40 pm
by Childnurse
Right then. The brake cables have been sorted out (thanks to all who advised on that one).

I now need to start work on fitting the exhaust pipe and I would like to know where under the floor the hangers and brackets should be fitted please.

As ever, always very grateful for all replies.

Thank you.

Re: Exhaust pipe fitting

Posted: Sun Aug 02, 2015 12:36 am
by mike.perry
Rear hanger in front end of rear boot "box section". Front hanger where floor slopes upwards under the back seat.
Support the front pipe with a jack in front of the silencer and wind up and adjust fit on manifold pipe then fit clamp

Re: Exhaust pipe fitting

Posted: Sun Aug 02, 2015 5:55 pm
by Childnurse
mike.perry wrote:Rear hanger in front end of rear boot "box section". Front hanger where floor slopes upwards under the back seat.
Support the front pipe with a jack in front of the silencer and wind up and adjust fit on manifold pipe then fit clamp
Thank you very much. That was very helpful and I got the the exhaust system back together this afternoon.

Next stop... electrics.