Morris Minor Owners Club

Hi can anyone please shed some light on which panel I need or panels[frame][/frame]

you can just see the main cross member end in picture so it's the panel above it

If that's the end of the crossmemember, then you need outer and inner front and rear sills. Probably quite a few other bits too, but it will be worth it when it's done. They'll also be a "kick plate" and finisher to add, but they just bolt on once the welding is done.

Hi I take It these bits I need :-
Inner Sill Step L/H (Heavy Gauge With Seatbelt Anchor)
Boxing Panel L/H (2-Door)
Outer Undersill L/H (2-Door/Conv)
Kick/Step Plate L/H (2-Door/Trav/Conv)
Sill Rail Finisher L/H (2-Door/Trav/Conv)

Regards
Anthony

All well detailed here...you'll be needing most of the 'sill' parts and probably a floor section or two... ! http://www.moss-europe.co.uk/shop-by-mo ... anels.html

Looking at ESM I think this Is all I need ?

You won't need anything until you've chopped out all the rotten metal, and then you'll get the exact measure of what you need.

Already chopped out just need to work out what panels I need as welding for next two days In the workshop

Have you any up to date pictures after the 'chopping' ?