Page 1 of 1
Loom wires
Posted: Sun Jul 05, 2015 8:26 pm
by ttwlr
When I purchased my Morris, all lights and engine wires etc were disconnected, is there away to find out what wires go to what ?
Re: Loom wires
Posted: Sun Jul 05, 2015 9:11 pm
by John Naylor
Obtain correct wiring diagram for your car from workshop manual. Identify wires and functions from colour codes. Use a test lamp and check out one circuit at a time.
John
Re: Loom wires
Posted: Sun Jul 05, 2015 9:17 pm
by ttwlr
I need an idiots guide to it

Re: Loom wires
Posted: Sun Jul 05, 2015 9:35 pm
by bmcecosse
Look at the excellent coloured diagram at the top of this section - print it out and laminate it. It doesn't get any earier than that..... Simples!
Re: Loom wires
Posted: Mon Jul 06, 2015 3:14 pm
by mike.perry
Use that as a guide but there are variations for different models. As said, identify the correct diagram for your car from the proper workshop manual which will give the colour codes. Lay the new loom out alongside the car and identify all the terminals