How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 9:27 am
Hi I am going to show u how i made Lucas whington horn cup and bracket - i used simple tools for it - Thank u
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
How to Made Lucas Horn Cup
Page 1 of 1
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 9:34 am
This is a stanless steel cup from kitchen[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 9:38 am
After 3 hours used Hammer[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 9:41 am
How to made The horn bracket[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 9:45 am
The Made parts whit Horn[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 9:47 am
[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 9:49 am
Pair of parts[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 10:06 am
That's brilliant 
lovely bit of ingenuity 
lovely bit of ingenuity Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 10:31 am
You'll get a job with Charles Ware Sandun. ! 
Re: How to Made Lucas Horn Cup
Posted: Fri Jul 03, 2015 11:44 pm
Great skill and patience!
Re: How to Made Lucas Horn Cup
Posted: Sat Jul 04, 2015 6:18 am
Excellent work Sandun.
Mick
Mick
Re: How to Made Lucas Horn Cup
Posted: Sat Jul 04, 2015 8:55 am
Nice job!
Do they sound different with the caps on?
Do they sound different with the caps on?
Re: How to Made Lucas Horn Cup
Posted: Sat Jul 04, 2015 8:56 am
I was a marine engineer with BP Tankers and sailed with Indian and Pakistani engine room staff and believe me they can make anything from a piece of metal.
Re: How to Made Lucas Horn Cup
Posted: Sat Jul 04, 2015 12:31 pm
Thank u - but not end this job - ok finaly Remove the edge and Polish using sand paper - P 2000 is beter to final cut[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Sat Jul 04, 2015 12:48 pm
Finished - I use my hand with sand pepar for polish it , think if u use machin for polish , it will Nice - ok my cost Rs 200 for 2 cups and + Sand paper cost = total Rs 250 , it is same 1 pound i think - about me , i had a government job as an Account Assistent in PRDA - Sri Lanka - but when the president change in 2015 lost my job - ok i have time now , I got a 3 days finish it my hand - Thank you[frame]
[/frame]
Re: How to Made Lucas Horn Cup
Posted: Sat Jul 04, 2015 3:47 pm
Impressed!
Best wishes,
Mike.
Best wishes,
Mike.
Re: How to Made Lucas Horn Cup
Posted: Mon Jul 06, 2015 5:13 pm
Sandun,
Excellent job, I would be very proud if I had made them as well as that.
Excellent job, I would be very proud if I had made them as well as that.
Re: How to Made Lucas Horn Cup
Posted: Tue Jul 07, 2015 6:28 am
Well done Sandun!
Regards
Declan
Regards
Declan
Re: How to Made Lucas Horn Cup
Posted: Tue Jul 07, 2015 6:55 pm
Thank u...