Page 1 of 1
Indicator flashing double speed one side.
Posted: Tue Jun 30, 2015 10:21 am
by chrisdebois
Hello. I just tested the indicators yesterday and found that the nearside ones flash at about twice the speed they should. Front and back are both flashing though. Would there be an obvious (to someone not stupid like me) reason for this?
Chris.
Re: Indicator flashing double speed one side.
Posted: Tue Jun 30, 2015 11:44 am
by bmcecosse
Wrong watt bulb fitted
Re: Indicator flashing double speed one side.
Posted: Tue Jun 30, 2015 12:01 pm
by chrisdebois
Thank you again for your help - it is always very much appreciated.
Chris.
Re: Indicator flashing double speed one side.
Posted: Tue Jun 30, 2015 3:03 pm
by Boomlander
You will find that you need a 21watt bulb in each indicator to operate the flashing relay at the correct speed.
Re: Indicator flashing double speed one side.
Posted: Wed Jul 01, 2015 1:15 pm
by bmcecosse
It's pozsiblethere is a double fault with. Twin filament bulb. Earth Fault and blown 21 watt filament, so it is earthing back through the 5 watt filament.....or the bulb may be in wrong wayround!