Morris Minor Owners Club

Hi, I have bought a stainless door mirror similar to the one in the picture on Charles Ware's page (under the section marked "News" to the right), and wish to fit it on the stainless corner capping as per this picture.
I have cut the bolt down to fit in the aperture but am not sure how to re-fit the capping once the mirror is mounted. Do I bend the stainless capping to get it over the frame or do I need to take more of the frame apart?
Thanks.

http://www.morrisminorspareparts.co.uk/ ... entilators

i think you carefully bend it over
i have screw on ones

Yes, mine screw on but I wouldn't like to crease or kink it out of shape.

Mine bent OK without damage.
John

just prize it over the frame part...
done mine ok....[frame][/frame]

I didn't like the idea of bending it open to get it on the frame so I silver soldered the bracket to the triangle!
Seemed like a good idea at the time!

Alan

Wow!

I fitted mine by removing the quarter-light rubber surround. It gives access to the mirror attachment with the capping in place.