Page 1 of 1
Dashboard Light Switch Screws
Posted: Thu Jun 25, 2015 2:27 pm
by Squidger
Does anyone know the size of the screws for the dashboard lighting switch please (the one underneath the dashboard near the speedo).
I've just obtained one (without screws unfortunately) as it was missing on my van.
Cheers
Re: Dashboard Light Switch Screws
Posted: Sat Jun 27, 2015 8:43 pm
by moggalot
I was thinking 4BA but the screws won't go into a 4 BA tap more than a couple of turns. However, there doesn't seem to be a BSF that small. I reckon a couple of small 4BA screws will do the trick since the backplate is pretty thin and only has a small amount of thread in it. Should be able to get a couple of pan heads (or hex) on ebay (or similar internet auction sites!)
Re: Dashboard Light Switch Screws
Posted: Sat Jun 27, 2015 10:39 pm
by Squidger
That's great, thanks for the reply
Re: Dashboard Light Switch Screws
Posted: Tue Jul 14, 2015 1:12 pm
by Squidger
Just to confirm 4ba won't fit. What you need is a couple of 1/4" 6ba's. These work a treat. Just thought I'd post this up in case anyone has the same query in future.
Re: Dashboard Light Switch Screws
Posted: Tue Jul 14, 2015 11:00 pm
by whyperion
Anyone got a screw guage, I have loads of little fixings inherited from dad, but goodness knows what they fitted/ might fit
Re: Dashboard Light Switch Screws
Posted: Wed Jul 15, 2015 1:52 am
by BLOWNMM
G'day all
The correct thread for these screws is 5 BA.
Cheers Bob