Page 1 of 1
MORRIS BRAKES
Posted: Sat Jun 13, 2015 10:42 am
by lencot76
Hello I am removing the front brakes,or trying to .What is the size of the nut that holds the slave cylinder on.I have a range of sockets,but am having a problem finding one to fit.Len
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 12:00 pm
by aupickup
i am sure the small one is a ba size
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 12:09 pm
by philthehill
The spanner required for the small bolt (not nut) that holds the wheel (slave) cylinder to the back plate is - 3/16" BS # 1/8" BS.
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 12:14 pm
by lencot76
Thanks that is one I havn`t got Len
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 12:15 pm
by lencot76
Is there just one nut or bolt holding the slave cylinder
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 12:29 pm
by aupickup
there is 2
1 large and 1 small
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 1:27 pm
by lencot76
What is the size of the larger one
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 1:36 pm
by philthehill
The spanner that fits the large bolt is 1/2" A/F.
Re: MORRIS BRAKES
Posted: Sat Jun 13, 2015 4:35 pm
by lencot76
Found one in my assorted spanner box,and the cyl.is now off Thanks