Page 1 of 1
Interior door pillar trim panels
Posted: Sat May 30, 2015 11:11 am
by impearse
The moggie we have bought is a 4-door and the trim panels that cover the door pillars between the doors have been taken out. They are still present, though, so no need to make new ones yet. The question is, how are they fitted? The panels themselves have 3 holes in them, and there are 3 corresponding holes in the bodywork. Are they screwed, or are there clips to be used? Any pictures around of how it's done?
Re: Interior door pillar trim panels
Posted: Sat May 30, 2015 12:04 pm
by Trickydicky
On mine they are screwed in with the three screws.
Re: Interior door pillar trim panels
Posted: Sat May 30, 2015 2:52 pm
by ASL642
If you don't want to screw the panels in you can use the clips that are available from morris suppliers for fixing in the door cards
http://morrisminorspares.co.uk/shop/pro ... 7f8132d733
They fit into the hole in the same way the door card clips do and then push into the bodywork.
Re: Interior door pillar trim panels
Posted: Sat May 30, 2015 7:23 pm
by impearse
Thanks folks, I'll see what I can sort out.