Cooling
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 104
- Joined: Sat Oct 06, 2012 10:33 pm
- MMOC Member: No
Cooling
Been out in the van today. Top of rad is hot bottom of rad is cold. does this mean thermostat is not opening, the heater is working but not as hot as I thought it would be.
Thanks dylan
Thanks dylan
-
- Minor Legend
- Posts: 2528
- Joined: Fri Aug 03, 2007 4:06 pm
- Location: stalbans
- MMOC Member: No
Re: Cooling
it means the rad is working , it the thermostat is working the top of the rad should get hot all of a suddern . to test the stat take it out and put it in some hot water it should open for what they cost get a new one
[sig]5641[/sig]
Re: Cooling
It's perfect... If you want more heat - fit a higher rated stat (88 or even 92) - check none of the pipes are kinked - maybe even flush through the heater - and you can block off the bypass hose for very best heater action!



-
- Minor Legend
- Posts: 1565
- Joined: Fri Aug 05, 2011 9:53 pm
- Location: Leeds, West Yorkshire
- MMOC Member: No
Re: Cooling
I am suffering the same issue during the winter, when I travelled across the Pennines to Manchester last month the temp gauge never got off the bottom of the scale (40 deg c) I doubt it's doing the engine any good so now I have a sheet of 1/4" ply with a letterbox size cutout at the bottom, 1/3 the size of the front grill.
I took the car for a long run and the temp gauge now stays between 70&80 deg c. I have a new 82 deg stat fitted.
It's been discussed a few times that the minor is way over cooled.
I took the car for a long run and the temp gauge now stays between 70&80 deg c. I have a new 82 deg stat fitted.
It's been discussed a few times that the minor is way over cooled.
Last edited by Trickydicky on Mon Mar 16, 2015 6:49 am, edited 1 time in total.
Richard
Opinions are like people,everyone can be different.
Opinions are like people,everyone can be different.
-
- Minor Fan
- Posts: 104
- Joined: Sat Oct 06, 2012 10:33 pm
- MMOC Member: No
Re: Cooling
Have ordered a 82 off fleabay. Had the rad off a few times when doing the van up, flushed it out and think I would of flushed heater rad out.
Thanks all, will see how I get on.
Thanks all, will see how I get on.
Re: Cooling
Mini never had a 948 engine.... The Mini rad is also rather thicker - and more densely finned...and has a larger fan close to it and pushing air through it like mad.. But it's certainly true that the Minor is way over cooled...however if the stat is working, it shouldn't be necessary to blank off the rad.... If you don't do much traffic - it's very possible to remove the fan, in winter at least.



-
- Minor Fan
- Posts: 104
- Joined: Sat Oct 06, 2012 10:33 pm
- MMOC Member: No
Re: Cooling
Are there different types of thermostat housing used on minnor engines.[frame]
[/frame]
-
- Minor Legend
- Posts: 2966
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Cooling
The gold coloured one on the right looks like a Mini one. The one on the left looks like a Minor one.
-
- Minor Legend
- Posts: 1140
- Joined: Thu Jan 19, 2012 4:55 pm
- Location: Le Tronquay, nr Bayeux, en France - Pop in for a cuppa!
- MMOC Member: No
Re: Cooling
Yes.
I think the 803 ones are slightly different.
I 'think' the one on the right is a Marina one. The other standard Minor.
I think the 803 ones are slightly different.
I 'think' the one on the right is a Marina one. The other standard Minor.
-
- Minor Fan
- Posts: 104
- Joined: Sat Oct 06, 2012 10:33 pm
- MMOC Member: No
Re: Cooling
The one on the left is off my van. I have another minnor engine, I thought I would put the gold one on as it was in better nick. Didn't realise it was different till tried to fit it. It fouls the heater pipe.
-
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: Cooling
get a mini pipe that runs by the manifold much better
-
- Minor Maniac
- Posts: 11587
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Cooling
This is a Marina thermostat housing cover.
It has a filling plug in the top of the cover.
http://www.ebay.co.uk/itm/12G3535-AUSTI ... 419361ed6b
From the current Moss catalogue:-
12G103 Housing thermostat.
12A408 Housing thermostat with tapping for temp gauge.
From other sources:-
10M220A Housing thermostat - Alloy
10M220B Housing thermostat - Brass
It has a filling plug in the top of the cover.
http://www.ebay.co.uk/itm/12G3535-AUSTI ... 419361ed6b
From the current Moss catalogue:-
12G103 Housing thermostat.
12A408 Housing thermostat with tapping for temp gauge.
From other sources:-
10M220A Housing thermostat - Alloy
10M220B Housing thermostat - Brass
Last edited by philthehill on Sun Mar 29, 2015 3:57 pm, edited 1 time in total.
-
- Minor Legend
- Posts: 1140
- Joined: Thu Jan 19, 2012 4:55 pm
- Location: Le Tronquay, nr Bayeux, en France - Pop in for a cuppa!
- MMOC Member: No
Re: Cooling
Not the one that came fitted to my Marina engine, but I'll take your word for it! 

-
- Minor Maniac
- Posts: 11587
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Cooling
Chesney
You must have a early Marina thermostat housing fitted Pt No: 12G103 which was soon superseded by the thermostat housing with the filler plug in the top Pt No: 12G3535.
Phil
You must have a early Marina thermostat housing fitted Pt No: 12G103 which was soon superseded by the thermostat housing with the filler plug in the top Pt No: 12G3535.
Phil