Page 1 of 1
Split screen help!!!!!
Posted: Fri Mar 06, 2015 7:59 pm
by Heronwood
After speaking (and being reassured) to both my spray shop man and a local windscreen company I wondered what the fuss was all about, they both implied that the split screen would be easy to fit following the re-spray……….WRONG…..they both gave up after several attempts and I am left with a window-less beautiful series 2,
I live in Stratford-on-Avon does anyone have Tel No of a guy or company who CAN fit the screen?
Kind regards,
Mike
Re: Split screen help!!!!!
Posted: Fri Mar 06, 2015 10:39 pm
by mike.perry
You have been warned enough times on this message board.
I know of one company which will do a proper job but they are near Chobham in Surrey
Re: Split screen help!!!!!
Posted: Sat Mar 07, 2015 6:58 am
by kennatt
Please do a search on how to do it,its not that difficult,various ways.
Re: Split screen help!!!!!
Posted: Sat Mar 07, 2015 10:32 pm
by DAVIDMCCULLOUGH
Check out the top of page 14 on this, it may help. Ive done a few now and one to seal shortly that i fitted a while back.
http://www.mmoc.org.uk/viewtopic.php?f= ... &start=195
Re: Split screen help!!!!!
Posted: Sun Mar 08, 2015 7:52 pm
by namass1
Did you really need to remove the screen to spray? Could you have not masked the screen off, as I will do when I re-spray my mm?
Re: Split screen help!!!!!
Posted: Sun Mar 08, 2015 8:52 pm
by smithskids
My mm is 65 this year and the seals are getting a bit crisp, I have renewed the rest but am dodging the windscreen job, fortunately it is a tourer.

Re: Split screen help!!!!!
Posted: Mon Mar 09, 2015 7:43 am
by kennatt
namass1 wrote:Did you really need to remove the screen to spray? Could you have not masked the screen off, as I will do when I re-spray my mm?
depends how much corrosion there is under the rubber and on the frame,most ser11 by now will have some because the screens are very prone to letting water underneath,.Don't fret about it,yes its a pig of a job but its not THAT hard to sort out.I've had mine out three times over the years and replaced it single handed,just look up my method of how to do it,works fine.