Morris Minor Owners Club

Hi all, after re-reading all the advisories to my last MOT, the rear bushes were in for criticism, so I decided to go POLY. To get right to the point, there are two different rear shackle poly bushes, red and blue, anyone know which way around they go.[frame][/frame]

I assume it matters because they are different dimensions.. the outer flange is wider on the reds, so the blues have a longer shank. Any advice would be appreciated.
[frame][/frame]

Who sold you them? Normally colour indicates different 'shore hardness' levels... Perhaps the shorter ones are intended for the rear damper arm link? (or perhaps the other way round.... ). If you butt them together in a spring eye - do both colours meet in the middle?

Hi Roy, thanks for you quick reply, I've tried them on the old shackle pin and they are the right length[frame][/frame]

the ESM kit especially for the rear springs on the pickup came with four red four blue and four large blue for the front attachment of the spring.[frame][/frame]

Yes - well the Pup front spring mount is larger. I wouldn't mix the colours on the same pin - so put the blues on the spring - and the red in the shackle/chassis mount.

will do. thanks Roy

For what its worth my kit was all red for the rear. Suggest you ask ESM in case its a mix up.

My polybush kit 18 months ago was all green but I cant remember if its esm or bull motif

Bullmotif supply the green ones