Page 1 of 1
948/1098 flywheel
Posted: Thu Feb 19, 2015 6:02 pm
by maxwoods
Hi
Can any one tell me it the flywheel is the same on these engines?
Cheers
Max
Re: 948/1098 flywheel
Posted: Thu Feb 19, 2015 6:05 pm
by bmcecosse
The mountings for the clutch pressure pad are different - the 1098 uses a larger diameter clutch. I think there are weight differences too......
Re: 948/1098 flywheel
Posted: Thu Feb 19, 2015 7:45 pm
by Theo_NL
Yes they are different. When I bought my Morris, it had a 1098 engine with 948 gearbox, clutch and flywheel. If I remember right, also the engine backplate was 948. With the gearbox not in good condition, I made it all 1098 again.
Re: 948/1098 flywheel
Posted: Thu Feb 19, 2015 9:26 pm
by DAVIDMCCULLOUGH
948is a thicker and heavier flywheel.
Re: 948/1098 flywheel
Posted: Thu Feb 19, 2015 10:14 pm
by janstolp
Re: 948/1098 flywheel
Posted: Fri Feb 20, 2015 9:36 am
by bmcecosse
The earlier thread suggests the 948 fly is lighter than a 1098. The 803 being heavier....