Morris Minor Owners Club

Hi, all, just bought a morris Minor with an ant roll bar and need to replace the green nylon blocks on the front and I have just read that they are only hydraulic pipe clamps.

What is the best place to buy as I can only get the whole kit from ESMM and that’s £25+vat, would like to get a lot cheaper so any info would be greatly appreciated. Are they a standard size for the MM.

Thanks, Paul[frame][/frame]

That took me about 10 seconds....... http://www.ebay.co.uk/itm/Pipe-Clamp-Si ... 4d0bfaf4ae If you really WANT to retain the understeer inducing anti-roll bar.......

These are the correct type and have the two bolt fixing which is required for holding the anti-roll bar. £3.95 each plus the usual.

https://www.merlinmotorsport.co.uk/p/1- ... 5mm-arb-16

Merlin Motorsport do various sizes so check the dia of your anti roll bar and distance between securing bolts before ordering.
Merlin Motorsport have supplied me with this type of anti-roll bar clamp and which were suitable for my anti-roll bar and I have been very happy with the product and the service.