3rd / 4th Synchro hub
Posted: Wed Jan 07, 2015 11:42 pm
As per my gearbox rebuild post, can anyone confirm the orientation of the hub on the shaft, think the question is lost in the thread.
There are three holes inside that show the bottoms of the detent springs, only visible from one side.
I am 99% certain they face 3rd gear, if indeed it matters.
Br grateful if someone could confim for me.
There are three holes inside that show the bottoms of the detent springs, only visible from one side.
I am 99% certain they face 3rd gear, if indeed it matters.
Br grateful if someone could confim for me.