Anyone restored a wolseley 16/60/oxford mk6/austin a60/riley
Posted: Thu Dec 11, 2014 7:44 am
Having started to do a little welding on our wolseley 16/60 ready for this years MOT I'm finding lots of filler jobs 
There have been so many dodgy jobs that I'm not sure whether the following is correct or not.
The boot floor stops at the inner sill and there was foam strip between it and the outer wing with a thin skim of filler over the top. Can anyone who has restored a 16/60 or other farina saloon tell me if this is standard or just a cunning bodge?
Thanks,
Philip
There have been so many dodgy jobs that I'm not sure whether the following is correct or not.
The boot floor stops at the inner sill and there was foam strip between it and the outer wing with a thin skim of filler over the top. Can anyone who has restored a 16/60 or other farina saloon tell me if this is standard or just a cunning bodge?
Thanks,
Philip
