Page 1 of 1

side lights

Posted: Sun Nov 23, 2014 8:21 pm
by qwertyhenry
hi guys is there a inline fuse for the side lights as all the rest of the lights are working ie ,head lights (dip, main beam) and indcators it has me stumted :( any ideas thanks :oops:

Re: side lights

Posted: Sun Nov 23, 2014 8:43 pm
by panky
Looking at the wiring diagram there is a 10 amp in-line fuse that also feeds the panel lights and number plate lights - are these working? Sorry don't know where the fuse is :-?
There's a red/green wire to the fuse and a red wire coming out if this helps.

Re: side lights

Posted: Sun Nov 23, 2014 10:00 pm
by andy.pointeer
Hi there is an inline fuse just below the fuse box, see photo below[frame]Image[/frame]

Re: side lights

Posted: Mon Nov 24, 2014 6:19 pm
by qwertyhenry
side lights now working :D

Re: side lights

Posted: Mon Nov 24, 2014 6:42 pm
by andy.pointeer
Well Done, According to the manual this should be a 10amp fuse, was it a blown fuse???

Re: side lights

Posted: Mon Nov 24, 2014 8:54 pm
by qwertyhenry
Rusty contact as it had been stood for 12 years but all good now

Re: side lights

Posted: Wed Dec 03, 2014 8:58 pm
by bmcecosse
Andy -is that a 4TR unit I see - for an 11 AC alternator ?? Not many of these about now !!

Re: side lights

Posted: Thu Dec 04, 2014 12:03 pm
by andy.pointeer
Hi bmc. I do have an alternator and there is a normal control box with wires removed and fuse box in picture. not sure what a 4TR is???

Re: side lights

Posted: Thu Dec 04, 2014 5:35 pm
by bmcecosse
A right - so it's just a fuse box. The 4TR controls the (now rare) 11 AC alternator. I just wondered if you had one.