Morris Minor Owners Club

Hi,
I'm trying to replace the air filter in my traveller. I really seems like it ought to be a very easy job but I can't get the air filter open to change the element. I've removed it from the carb by undoing the wingnut but I can't get the two parts apart to get inside. Is there any knack to separating them? I don't want to force it and break it.

Thanks,
James

There isn't really a trick, just fits into the base by the lip. Grab the intake tube firmly, and give the housing a good 'tap' with the palm of your hand (be ready to catch it if it goes). Should see it right. Sometimes, if it has not been replaced in a while, the oil from the breather can cause the filter to stick to the base, but should slip off easily when prompted.

just be a bit brutal it should split

Watching one of those 'How Its Made' sections on Discovery channel ( or whatever ) , one covered (USA I think , Fram filters - folded paper and a sort of neoprene top and bottom sections, all just about automated), the problem I have is the 948 Filters , although listed as same part number as the 1098s, in the 'squarer' air filter housing of the 948 the modern elements dont quite fit nicely, anyone got a good nos Unipart stock that might fit better than my local motor factors ?

I managed in the end. I went round the join with a stanley knife then prised it open with a screwdriver.

It's a bit late to tell you now, but mind out that you don't break the nozzle (which is a convenient lever for holding on to) off the filter housing when you're brutalising the parts apart from one another. It's a pain having to weld it back on, and it's amazing how much induction roar you get when it's broken off!