Page 1 of 1

boot lid sound proofing.

Posted: Tue Sep 23, 2014 12:38 pm
by Paulrh
Does anyone know if the boot lid should be lined with a sound proofing media?.
My 52 mm series seems to have signs glue residue in the main center panel has if there has been something on it .

Re: boot lid sound proofing.

Posted: Tue Sep 23, 2014 4:47 pm
by ian.mcdougall
there was a sound deadener on the minors it was like a thick tar paper that over the years lost its stick, on inside the doors and rear wings of two doors and inside boot. there is a modern version a bitumastic sheet that sticks on like s**t to a blanket some have a diamond pattern with a thin plastic cover that can be removed and a smooth one which would look better but be careful fitting it as it does stick well, oh and it helps if panel and pad are warm when fitting

Re: boot lid sound proofing.

Posted: Tue Sep 23, 2014 7:17 pm
by Paulrh
Thank you so much,
I am striving to get the car back to concourse for the spring. :o

Re: boot lid sound proofing.

Posted: Tue Sep 23, 2014 10:22 pm
by TFM150K
If you are talking of JUDGED concours, it might be advisable to talk to one of the judges or swap this thread to the concours
section as they may have an opinion as to what is right and what is not!
:wink:
Bert (pseudonym)

Re: boot lid sound proofing.

Posted: Fri Oct 17, 2014 8:00 pm
by seriesmm_1
Paulrh,I have the same car as you but a few weeks older & i am looking for the same thing,have a look under the back seat ,there is sound deadening stuff there,I believe its the same as that which is black on the surface with something like felt underneath. My boot has traces of this felt on it
Regards
BrianR

Re: boot lid sound proofing.

Posted: Sun Oct 19, 2014 2:25 pm
by irmscher
I would make sure its fire retardant anywhere near the tank :)

Re: boot lid sound proofing.

Posted: Tue Nov 11, 2014 3:31 pm
by philthehill
I think that you will find that the stuff spread on the inside of the doors, boot lid and other areas of the car was used to stop the panel drumming and was not for sound deadening per say.