Page 1 of 1

Help with heater valve.

Posted: Thu Aug 28, 2014 10:06 pm
by amgrave
I have a 63 saloon with the round heater and a control for fresh or interior air. A previous owner has fitted the new type of heater control to the rear of the head, the one with the lever. It has not got a cable connecteted to it but has a piece of thick wire through the lever hole and held under the cable clamp loose enough to move it back and forth :roll: . Can someone tell me if the control is open when the lever is toward the valve body or away from it. At a later date I might add a cable to operate it from the seat. Many thanks.
Andy

Re: Help with heater valve.

Posted: Thu Aug 28, 2014 10:10 pm
by bmcecosse
Test it by feeling the pipes! But straight up should be open.....where it should be left 365 days of the year - to keep water flowing round the back of the engine - and the heater. No need for a cable...

Re: Help with heater valve.

Posted: Thu Aug 28, 2014 10:21 pm
by mike.perry
The Knob for that valve has PUSH FOR HEAT stamped on it

Re: Help with heater valve.

Posted: Thu Aug 28, 2014 10:31 pm
by amgrave
mike.perry wrote:The Knob for that valve has PUSH FOR HEAT stamped on it
Thanks mike.perry that's answered my question nicely :D
Good point BMC, on hot day's (remember them) I'll just open the windows.