Page 1 of 1

Replacement panel help?

Posted: Thu May 22, 2014 7:08 pm
by laneychief
Hi guys, underside of morris is pretty dead and I'm in the process of getting new bits to fix him with!

I don't know the names of the panels or which bit is which, can anyone help?

Firstly, I need this panel![frame]Image[/frame]


If anyone could link me to it on ESM that would be amazing!!

Warming up the credit card....


Cheers, Edd.

Re: Replacement panel help?

Posted: Thu May 22, 2014 7:13 pm
by laneychief
Is it this bit??[frame]Image[/frame]

Re: Replacement panel help?

Posted: Thu May 22, 2014 7:46 pm
by Trickydicky
Hi, That is part of the sill assembly, here is a link to the Moss website with schematics of what parts you may need.
http://www.moss-europe.co.uk/Shop/ViewP ... exID=17115

Also here is another link, http://www.morris-minor.co.uk/p427.htm it also lists body panels

Have fun :)

Re: Replacement panel help?

Posted: Thu May 22, 2014 7:48 pm
by laneychief
Am I right in thinking that's the undersill?

Thanks!

Re: Replacement panel help?

Posted: Thu May 22, 2014 7:57 pm
by laneychief
[frame]Image[/frame]


Is this it? The other side looks like this,
:[frame]Image[/frame]

Re: Replacement panel help?

Posted: Thu May 22, 2014 8:01 pm
by Trickydicky
The part you need is no 32 on the moss website. It also shows a side view of the components that make up the floor and sill assembly.

Re: Replacement panel help?

Posted: Thu May 22, 2014 8:07 pm
by laneychief
Nice one, that's the conclusion I'd come to! Should I be worried that the RH boxing plate has been repaired with a solid panel??

Re: Replacement panel help?

Posted: Thu May 22, 2014 9:02 pm
by Trickydicky
I would be worried as it it most likely that the boxing panel was corroded and the plate was welded on to "repair" it.
My advice is be prepared for the worst when you remove it :o

Re: Replacement panel help?

Posted: Thu May 22, 2014 9:11 pm
by Mark Wilson
Certainly doesn't bode well in terms of the level of bodgery your car has suffered, but many have been brought back from similar or worse. You'll probably find fairly serious corrosion to the sill step as well. Recommend that you spend some quality time with the resto threads posted by Taupe or Neil MG (there are others as well!). And don't be tempted to do too much cutting too soon - even well rusted bits provide valuable reference points.

Mark.

Re: Replacement panel help?

Posted: Fri May 23, 2014 8:11 am
by chickenjohn
Looks like you need a new boxing panel and also an under outer sill. If these have gone you may also find the front and rear floor edge panels need work too!

Re: Replacement panel help?

Posted: Fri May 23, 2014 8:24 am
by laneychief
Cheers all, the lh looks ok but I was worried about the RH and what horrors lie beneath the solid metal!

Re: Replacement panel help?

Posted: Fri May 23, 2014 8:33 am
by ASL642
Concentrate on one side at a time. Work your way around the car. That way it's not too daunting a task! :D