Page 1 of 1

Painting the gearbox?

Posted: Mon May 19, 2014 7:51 pm
by laneychief
Undertaking my resto (see thread here) http://www.mmoc.org.uk/viewtopic.php?f=28&t=54109

Engine and box been pulled out, engine is getting the green treatment, what about the gearbox?

Black hammerite? Any suggestions!

Thanks in advance!

Edd

Re: Painting the gearbox?

Posted: Mon May 19, 2014 8:04 pm
by stevey
it was left unpainted, but silver hammerite would work if you wanted - or gold seal :D

Re: Painting the gearbox?

Posted: Mon May 19, 2014 8:10 pm
by laneychief
So it won't rust if I don't paint it? I could just clean it?

Thanks!

Re: Painting the gearbox?

Posted: Tue May 20, 2014 7:52 am
by kennatt
laneychief wrote:So it won't rust if I don't paint it? I could just clean it?

Thanks!
it can't its cast alloy :D :D

Re: Painting the gearbox?

Posted: Tue May 20, 2014 8:02 am
by laneychief
kennatt wrote:
laneychief wrote:So it won't rust if I don't paint it? I could just clean it?

Thanks!
it can't its cast alloy :D :D

Amazing! That makes perfect sense. Can we build the whole morris out of this stuff. I hate rust.

Re: Painting the gearbox?

Posted: Tue May 20, 2014 8:37 am
by ASL642
If you do decide to paint it most MM suppliers sell green engine paint. I believe Land Rover Bronze Green is quite a good match.

Re: Painting the gearbox?

Posted: Wed May 21, 2014 10:58 pm
by GBond
I used aluma blast on mine, it looks great and is much easier to keep clean than the bare aluminum.

http://www.frost.co.uk/eastwood-aluma-blast-paint.html

Re: Painting the gearbox?

Posted: Thu May 22, 2014 6:03 am
by laneychief
GBond wrote:I used aluma blast on mine, it looks great and is much easier to keep clean than the bare aluminum.

http://www.frost.co.uk/eastwood-aluma-blast-paint.html


Oh that does look good!!!!

Re: Painting the gearbox?

Posted: Sat May 24, 2014 3:45 pm
by bmcecosse
Paint it gold - immediately doubles it's worth....