Page 1 of 1
three part clutch
Posted: Fri May 02, 2014 8:21 pm
by ringway
can you still get quinten and hazell three part clutch
Re: three part clutch
Posted: Fri May 02, 2014 8:55 pm
by bmcecosse
There are some QH clutch parts on ebay - but not a Minor clutch. Why so keen on QH ?? Plenty of Borg & Beck out there......
Re: three part clutch
Posted: Fri May 02, 2014 9:07 pm
by ringway
bmcecosse wrote:There are some QH clutch parts on ebay - but not a Minor clutch. Why so keen on QH ?? Plenty of Borg & Beck out there......
Re: three part clutch
Posted: Fri May 02, 2014 9:10 pm
by ringway
i was not sure if any other makes are ok this one on it looks like the original
Re: three part clutch
Posted: Sun May 04, 2014 9:31 am
by aupickup
borg and beck are made in china
driveline are the ones to go for
Re: three part clutch
Posted: Sun May 04, 2014 12:15 pm
by mike.perry
The old MM/803/948 drive plates had one piece friction plates, the new drive plates have segmented friction plates. I removed a little used new plate and found that the friction plates were loose on the rivets. The new clutch plates do not seem to have the bite of the old plates
Re: three part clutch
Posted: Sun May 04, 2014 7:22 pm
by bmcecosse
If the pressure assembly looks ok - just fit a new plate and new carbon thrust.