Page 1 of 1
Morris Minor Van 1966 questions
Posted: Thu Apr 03, 2014 8:41 am
by sidunc2828
Hi All
Restoring 1966 Morris Minor Van
Can anyone help with a few questions .
Are the seats the same in a van as Saloon/Traveller. I have an early set, with the curved backs and fold down on one side, in at the moment and want to go back to the original spec.
Is the interior light the same as other MM I have no light fitted. Should there be a number plate light.
What style of steering wheel should be fitted and with what horn push?
The speedo has spirals in the centre is this correct or should it be plain?
Someone has fitted new 7 leaf springs and shocks which makes the ride very hard. Any suggestions?
Thank you
Re: Morris Minor Van 1966 questions
Posted: Thu Apr 03, 2014 9:26 am
by MarkyB
Are the seats the same in a van as Saloon/Traveller.
I don;t think so, the covers tend to be much plainer for one thing.
Is the interior light the same as other MM
Pretty sure it is.
What style of steering wheel should be fitted and with what horn push?
Two spoke, press in horn push, not the sort that has a screw to hold it.
Someone has fitted new 7 leaf springs and shocks which makes the ride very hard
Put a paving slab or sack of sand in the back
They do tend to ride better when loaded.
Re: Morris Minor Van 1966 questions
Posted: Thu Apr 03, 2014 9:48 am
by Rasputin
The seats in a van are different to a saloon as the floor is flat in a van and slopes down in a saloon.If you fit saloon seats you will be tilting forward slightly.I drove a pickup with car seats fitted and I felt uncomfortable.
Re: Morris Minor Van 1966 questions
Posted: Thu Apr 03, 2014 6:06 pm
by bmcecosse
If the springs are too hard (surely 8 leaf for a van?) then just remove a leaf or two till you are happy with it....
Re: Morris Minor Van 1966 questions
Posted: Fri Apr 04, 2014 10:53 am
by sidunc2828
Cheers fellas much appreciated .
Will post some restoration pics soon
Re: Morris Minor Van 1966 questions
Posted: Sat Apr 05, 2014 4:02 pm
by TFM150K
[quote="sidunc2828"]Hi All
Restoring 1966 Morris Minor Van
Can anyone help with a few questions .
Are the seats the same in a van as Saloon/Traveller. I have an early set, with the curved backs and fold down on one side, in at the moment and want to go back to the original spec.
Rasputin has already dealt with the need for van frames for the seats (I am wondering if you already have these). Often the passenger seat would be the double-fold type (back folds down on to seat then the seat folds forward so it is easier to get in the back from the passenger door). Covers would usually be black or brown.
Re: Morris Minor Van 1966 questions
Posted: Sun Apr 06, 2014 9:29 am
by sidunc2828
TFM150K wrote:sidunc2828 wrote:Hi All
Restoring 1966 Morris Minor Van
Can anyone help with a few questions .
Are the seats the same in a van as Saloon/Traveller. I have an early set, with the curved backs and fold down on one side, in at the moment and want to go back to the original spec.
Rasputin has already dealt with the need for van frames for the seats (I am wondering if you already have these). Often the passenger seat would be the double-fold type (back folds down on to seat then the seat folds forward so it is easier to get in the back from the passenger door). Covers would usually be black or brown.
The seats are red with cream piping so would think they came out of an early MM. On the look out for some van seats.
Thank you.