Page 1 of 1
Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 12:04 pm
by bluegrass
I am missing the two Jubilee clips holding down the large corrugated air intake pipe in the engine bay.
Does anyone know which clips and size are best.
Thanks for any help.
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 1:24 pm
by bigjim
cable tie ?
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 2:12 pm
by lambrettalad
BIG ONES
They sell large ones in machine mart
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 3:44 pm
by POMMReg
Not Jubilee clips!
Just a metal loop affair with an annoyingly sml bolt to secure.
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 6:04 pm
by MarkyB
I think you can manage fine without a clip at all!
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 8:27 pm
by philthehill
If it is the clip securing the heater air inlet pipe in the engine bay they are available from Moss Europe Pt No: AHH5714. The bolt, washers and nut are also available from Moss Europe.
http://www.moss-europe.co.uk/Shop/ViewP ... dexID=1424 Item No: 103
I know it is MG/Sprite but I am pretty certain that the heater air inlet pipe in the engine bay is the same diameter as the Minor.
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 8:50 pm
by simmitc
Those are the straps that hold the pipe to the inner wing. What I want is the the clips that secure it at each end to (a) the front panel, and (b) the heater. A well known supplier claims to offer the clips, but they are nothing like the originals - twice as broad, twice as thick, and secured by turning what looks like a sardine key! I sent them back. If anyone finds the correct article, I'd be delighted to know about it.
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 8:52 pm
by mike.perry
lambrettalad wrote:BIG ONES
They sell large ones in machine mart
Or join 2 shorter ties
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 10:14 pm
by les
He said he wanted the clips holding the pipe down, which would be the ones shown in Phils link.
Re: Which Jubilee clips for corrugated air intake pipe.
Posted: Tue Mar 25, 2014 10:37 pm
by bluegrass
Thanks for the posts...yes its the ones holding the pipe down, so I'm delighted for link.
Much appreciated.!