Page 1 of 1
neiman 66 steering lock and ignition
Posted: Fri Feb 28, 2014 10:21 pm
by tommy-rocker
Hope someone has knowledge of this and can assist with wiring it up. I have been rebuilding my 1972 k plate van and lost the wiring details when refitting. I will be letting you all see my progress photos at a later date on a new website.
Re: neiman 66 steering lock and ignition
Posted: Fri Feb 28, 2014 10:30 pm
by bmcecosse
Welcome to the forum! As long as you have the original wiring looms - you just join same colour wires together.... Wires NEVER change colour at a connection - only at an 'event' ie switch/fuse/motor etc... Is there a specific problem with the steering lock?
Re: neiman 66 steering lock and ignition
Posted: Fri Feb 28, 2014 10:37 pm
by tommy-rocker
Hi there, loom was scrapped years ago and manual no help as i am fitting 1275marina engine with new alternator and doing away with original scheme . Now is negative earth
Re: neiman 66 steering lock and ignition
Posted: Fri Feb 28, 2014 11:57 pm
by bmcecosse
Have a look at the top of the electrical section here - the basic wiring diagram is there - and the alternator diagram too. Print them both off! They don't include the column lock - but the cable colours remain the same. Do you have a loom - or are you making one from scratch? The engine makes no odds - and alternator is shown
Re: neiman 66 steering lock and ignition
Posted: Sat Mar 01, 2014 4:34 pm
by M25VAN
These were the connectors as marked on the back of my neiman switch along with the cables that were attached. Also from a 72 reg van. Hope they make sense.
P n/c
R White thick and thin
Blank White thin and thin
30 Brown/Blue - 12V feed from fuse box
50 White/Red - Starter Solenoid